Trialtech Race Square Taper Crank Set

Opening Hours.
Mon: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

Trialtech Race Square Taper Crank Set

Product code: 10079

Overview
Additional Information
Questions

162mm (24T)	$43.41
170mm (22T)	$43.41

Sold out

Please note: These cranks no longer feature the Trialtech logo, they are now plain black!

- Great value Square Taper crankset from Trialtech!
- 24t chainring makes these a perfect replacement for many complete bikes (Onza Tyke, Rip, Bird etc.).
- Also available with a 22t chainring which is suitable for Inspired Flow 24" and 26" bikes.
- Tough forged 6061 aluminium alloy cranks complete with an aluminium bashring and steel 4-arm chainring offer superb performance at an affordable price.
- Four bolt spider with 64mm BCD (inner ring).
- Includes crank arms, bashring and chainring, already assembled and ready to fit.
- Available in a tough anodised black finish.
- 162mm or 170mm length.
- Weight: 675g (162mm length) / 680g (170mm length
- Offset: 31mm

Additional Information

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

EU authorised representative

Trialtech EU
2 Chemin des Frères Garbero,
Bat A3 C3,
Antibes,
06600,
France

Tel: +33761045614
Email: www.trialtech.co.uk/contact-us.php

Technical documents, and product safety certification are available on request, direct from Trialtech:

Trialtech
Unit 2,
Gallows Industrial Park,
Furnace Road,
Ilkeston,
Derbyshire,
DE7 5EP,
United Kingdom

Tel: 01159 303603
Email: www.trialtech.co.uk/contact-us.php

Questions

Ask a question

hey guys, will the 22t version fit ok on my 2012 fourplay? cheers

Posted by juanchax

Reply from TartyBikes

Hi

Yes, it will! You'll need to make sure you have a square taper BB installed. We recommend 122mm axle length for use with this crank on the Flow, and Fourplay.

Ben