Inspired Flow Alloy

Product code: 11522

	Black, No logo, Screw in Top Cap	$189.94
	Black, White Logo, Standard Steerer	$162.80

Sold out

- Styled to match Inspired frames perfectly, these forks are designed specifically for the new generation of street riding.
- Ultra thick CNC machined aluminium steerer tube (6mm wall thickness) is pressed and welded into the fork crown, removing the stress riser associated with the crown race seat area.
- Plain black fork Now supplied with Inspired screw in top cap to allow steerer tube front brake routing out of the box!
- Black fork with white Inspired logo uses a standard alloy steerer that requires an 18mm star nut. These can be purchased separately here. This fork cannot be set up with internal steerer front brake routing!
- Black fork with standard steerer is a slighter older design, and features lower legs that are approximately 5.8mm narrower than the threaded steerer option.
- Custom designed and manufactured disc brake mount (at the International Standard position) is extra long to prevent cracking at the top where it joins the leg.
- Super thick, large diameter fork legs provide additional strength.
- Dropout size 9.5mm to fit all standard 9mm axles (Hope, Try-All, Shimano, Chris King, V!Z, Onza, etc.). Echo hubs use a 10mm axle and will need modification.
- Fits 24" and 26" wheels.
- Disc mount only. Standard IS mount.
- Available in gloss powder coat black finish.
- Weight: Plain black fork: 1001g / Black fork with white logos: 913g

Fork Dimensions

- Axle to Crown length: 410mm
- Axle Offset: 25mm
- Steerer tube length: 203mm

Hope F22

Product code: 14156

£147.00

7 colours available

Hi! I'm planning to buy this fork but I'm confused by this line in the description: "Dropout size 9.5mm to fit all standard 9mm axles..." How is a 9.5mm hole going to fit a 9mm axle properly? Thanks, András

Posted by András Sallai

Reply from TartyBikes

Hi András

The drop out needs to be slightly bigger than the axle to allow it to fit, hence .5mm of the extra width. You'll find a similar tolerance on rear drop-outs. This fork will work with any 9mm axle QR or M6 bolt in hub with a 100mm OLD.

Ben

Petras

Best fork ever :)

Posted by Petras

I had been using this fork all summer. It's my third fork that I am using, last forks crashed. It's was Echo and Neon forks. Inspired fork is just amazing, it's very strong, thin and what is very important you can spin your bar, do tailwhips and other, That's why I bought this fork, because you can do more tricks :). It's not cheap, but worth believe! Cheers, Petras

Hi Petras - It's good to hear you like your forks! As you say they're a little more expensive, but they will usually last much longer so you will save money in the long term. Thanks for the review!

Browse…

Recently viewed

Shopping basket

My Account