Inspired Arcade Frame Kit

Product code: 14275

For a limited time only, while stocks last!

Top quality frame kit from inspired!
Includes frame, forks, headset & chain tugs.

Inspired Arcade Frame

- Tested extensively by Inspired team riders, and used by Jack Heard!
- Constructed from high quality Cr-moly steel, and ED coated internally to help prevent corrosion.
- Revised seat stay-to-seat tube joining method and added support bridge between the seat stays increases stiffness and strength of this high-stress area.
- The middle of the frame is further stiffened by a revised chain stay-to-bottom bracket joint, featuring an extra support gusset.
- +20mm IS disc mount, designed for a maximum rotor size of 180mm.
- Standard BSA 68mm bottom bracket features a 1.37" x 24tpi thread, suitable for use with any 68mm shell compatible threaded bottom bracket we stock.
- Seat post diameter of 27.2mm. Please note: An alloy 27.2mm seat post (no shim), fitted to a minimum insertion depth of 100mm must be used on this frame to validate the warranty.
- Supplied with Inspired Arcade Micro Chain Tugs in pewter finish, Inspired Arcade Integrated Seat Clamp and Inspired Integrated headset

Inspired Arcade Fork

- The Arcade fork features the new top cap design which screws into the threaded steerer tube and allows the hose to be routed through the steerer if required.
- Full steel construction for maximum strength, with tapered and butted legs to keep the weight as low as possible without compromising performance.
- Supplied with Inspired 15mm Arcade axle. Axle adaptors for use with M6 bolt hubs can be purchased separately here.
- CNC machined, standard IS disc mount can be used with post mount adaptors for rotor sizes up to 180mm if required.

- Frame kit only available in Satin Fluro Orange with black Arcade fork.

Full kit includes:

Inspired Arcade Frame
Inspired Arcade Forks
Inspired Integrated Headset
Inspired Arcade Mirco Chain Tugs
Inspired Arcade Integrated Seat Clamp
Arcade 15mmfork axle

Weights:

- Total frame kit weight (Frame, fork, rear and front axle, chain tugs, headset and top cap): 3.99kg

Geometry
- Wheelbase: 992mm
- Chainstay: 362mm
- BB Rise: +25mm
- Head Angle: 74.5°
- Centre of BB shell to centre top of head tube: 682mm
Reach: 443mm
Stack: 497mm

Compatibility
- Headset type: 1/18" integrated.
- Bottom bracket type: Screw-in, 68mm shell width
- Dropout spacing: Frame 135mm x 10mm / Fork 100mm x 15mm OR 100 x 9mm with M6 adaptors.
- Brake mount type: Frame +20mm IS Disc Mount / Fork Standard IS Disc Mount
- Bashguard type: n/a - requires a bash ring
- We recommend the Inspired Arcade V2 Crankset for use with this frame due to the increased width of the chain stays. Other cranks may fit, but tolerances could be tight!