Hope Pro 2 / Pro 4 / Pro 5 Trials Axle

Product code: 10778

10mm Bolt In, Pro 2 - HUB218S	$21.67
10mm Bolt In, Pro 2 Evo - HUB236S	$21.67
10mm Bolt In, Pro 4 - HUB1009-50S	$21.67
10mm Bolt In, Pro 5 - HUB1018-61S	$22.81
12mm Thru, Pro 2 Evo, Aluminium - HUB1007-3S	$21.67
12mm Thru, Pro 4 - HUB1009-49S	$21.67
12mm Thru, Pro 5 S/S - HUB1018-62S	$22.81

Sold out

- Replacement 2014 T6 aluminium axle to fit Hope Pro 2 Trials, Pro 2 Evo Trials, Pro 4 Trials hub or Pro 5 Trials hub. These axles will ONLY fit the Trials / SS hub, not a regular Pro 2, Pro 4 or Pro 5 hub.

Various models available:

- 12mm through axle for Skye, Crewkerz and 2020 onwards Hex and Fourplay bikes, HUB1007-3 or HUB1007-3S.

- HUB218 to fit 10mm bolts (fits non-Evo version of the hub, with 15mm diameter at both ends where the end caps fit on).

- HUB236 to fit 10mm bolts (fits Evo version of the hub, with 15mm diameter at the drive side end and 17mm diameter at the non drive side end).

- Pro 4 version (plain 17mm diameter on the drive side, 17mm on the non drive side - 10mm bolt in version HUB1009-50S, 12mm through axle version HUB1009-49S).

- Pro 5 135 x 12mm version (17mm diameter on the non-drive side, 17mm diameter tapering down to 15mm diameter on the drive side). HUB1018-62S
- Pro 5 135 x 10mm bolt version (17mm diameter on the non-drive side, 17mm diameter tapering down to 15mm diameter on the drive side). HUB1018-61S
- Ideal to replace any broken or stripped axles.
- Simple fitting with a mallet and a couple of bits of soft wood.
- Bolt-in version is designed for M10 male bolts, so axle is internally threaded.
- Now also available as a 12mm Through Axle model, suitable for use in the Inspired Skye or Fourplay and Hex Team 2020-onwards rear hubs, and as a conversion for any 12mm bolt through frames such as the Crewkerz Jealousy.
- Sold singly.
- Weight: 46g (alloy)

TartyBikes V3 Stickers, 79mm x 37mm (pack of 2)

Product code: 12008

£0.50

100%

Stickers

3 colours available

£0.50

3 colours available

Rory

Brilliant service!

Posted by Rory

After phoning Tarty Bikes to see if it was possible to get an axle for the original PRO 2 , They were able to order the right axle in from Hope and still have it delivered to me within a few days! This was brilliant as it went I could then go on a group ride in Glasgow and had no issues. Thanks Guys

Reply from TartyBikes

Thanks Rory - it was no trouble at all. Glad you were able to get out riding again quickly!

Browse…

Recently viewed

Shopping basket

My Account