Inspired Pro Integrated Crankset

Opening Hours.
Thu: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

Inspired Pro Integrated Crankset

Product code: 14085

Overview
Additional Information
Questions

Fitted as standard to Inspired XP and Pro alloy bikes!

Tough, durable design!
Supplied with BB to fit a variety of bikes and frames

- New from Inspired the super tough Integrated Pro Crank set!
- Custom made and innovative design featuring a fully integrated bash guard for increased strength and support in high impact areas.
- Tested and developed by Inspired team riders!
- 6069 forged alloy construction combined with a special crank arm design provides exceptional levels of strength and stiffness.
- Supplied with a 64mm BCD 4-bolt 22t chain ring with a durable black ED coating to help reduce wear.
- Supplied with Inspired's own threaded Euro BB for 68mm or 73mm BSA BB shells to fit a wide variety of bikes and frames. 68mm BB shells require extra spacers, which can be purchased separately here.
- A tough 24mm steel axle is pressed into the drive side crank arm - an industry proven design that's both strong and stiff.
- Durable satin black finish with stylish laser etched Inspired logos.
- Left crank arm attaches using an opposing pinch bolt design with chunky flush fit M15 preload bolt for a totally secure fit and accurate bearing preload. A design that has been used extensively in the mountain bike industry for decades.
- Available in 175mm crank length only with 22t chain ring only.
-Need a replacement BB for this crankset? We sell these separately here.
- Weight - 1140g inc. BB.

Additional Information

- For use with a 73mm BB shell, you won't require any spacers to fit the BB. For frames with a 68mm shell you will need to use one spacer on each side of the shell - can be purchased separately here.This 68mm or 73mm dimension refers to the width of frame where the bottom bracket fits in, please measure your frame before ordering!

Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check the black, M6 pinch bolt torque is at least 88 in-lbs (10 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.

EU authorised representative

Inspired Bicycles EU
2 Chemin des Frères Garbero,
Bat A3 C3,
Antibes,
06600,
France

Tel: +33761045614
Email: www.inspiredbicycles.com/contact

Technical documents, and product safety certification are available on request, direct from Inspired Bicycles:

Inspired Bicycles
Unit 2,
Gallows Industrial Park,
Furnace Road,
Ilkeston,
Derbyshire,
DE7 5EP,
United Kingdom

Tel: 01159 303603
Email: www.inspiredbicycles.com/contact

Questions

Ask a question

There are currently no questions relating to this product.

Reviews

Write a review

Not yet rated

People who bought this also bought…

Gusset Double Six Sprocket

Product code: 2006

From £15.00 to £17.00

Splined Sprockets

From £15.00 to £17.00

7mm wide base protects your freehub!

From £15.00 to £17.00

In stock

View options

In stock

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

Chainstay Protectors

4 colours available

£4.50

4 colours available

New sizing, available in 4 colours!

Wide range of compatibility, from the steel Inspired Arcade up to the widest alloy trials frames!

Double stitched velcro ensures maximum life!

£4.50

In stock

View options

In stock

KMC K1, 1/8''

Product code: 174

£14.00

Chains

£14.00

Formerly known as the K710 Kool chain!

New name, but still the same tough chain.

£14.00

In stock

Add to basket

In stock

Technical Info

New to trials? Then check out our product video guides for useful tips and technical advice

Video guides

Facebook

Follow us on Facebook for exclusive deals, promo codes and offers

Follow us

Need some help?

Have a question? No problem, call us on 01772 32 33 33 or get in touch via our contact page.

Contact us

Terms & Conditions

Privacy Policy

Cookies

Newsletter

Contact Us

© TartyBikes Ltd, 2025

Tel. (UK). 01772 32 33 33

Tel. (Intl). 0044 1772 32 33 33

TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN

Company No. 6131482

VAT. GB 860 0270 59

Web Design & Development by tame

Worldwide Delivery Available
We can deliver to United States and many other countries. Click here for further info.

Find out more Close