Ensure that your pedals are tightened to at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides. Before fitting, it's also a good idea to make sure your pedal axles are clean (a wire brush works well) then greased before installation.
Similarly, always check crank bolt torque is at least 310 in-lbs (35 Nm) every 5 minutes for the first few rides, then each and every ride after that.
Failure to keep your pedals or crank bolts tight as described above is likely damage your cranks and this will not be covered under warranty.
EU authorised representative
Trialtech EU
2 Chemin des Frères Garbero,
Bat A3 C3,
Antibes,
06600,
France
Tel: +33761045614
Email: www.trialtech.co.uk/contact-us.php
Technical documents, and product safety certification are available on request, direct from Trialtech:
Trialtech
Unit 2,
Gallows Industrial Park,
Furnace Road,
Ilkeston,
Derbyshire,
DE7 5EP,
United Kingdom
Tel: 01159 303603
Email: www.trialtech.co.uk/contact-us.php
£2.50
£0.50
In stock
New to trials? Then check out our product video guides for useful tips and technical advice
Follow us on Facebook for exclusive deals, promo codes and offers
Have a question? No problem, call us on 01772 32 33 33 or get in touch via our contact page.
TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN
Web Design & Development by tame
hey guys, will the 22t version fit ok on my 2012 fourplay? cheers
Posted by juanchax
Reply from TartyBikes
Hi
Yes, it will! You'll need to make sure you have a square taper BB installed. We recommend 122mm axle length for use with this crank on the Flow, and Fourplay.
Ben