Tartanium Hope Hose Spares

Product code: 14132

Item 01: 90 Deg Bolt	$8.68
Item 02: M6 Straight Connector	$8.68
Item 04: 5mm Shroud	$8.14
Item 07: 90 Deg Banjo	$9.23

Sold out

New to the Tartanium range, top quality Titanium fittings for your Hope hose / brakes!

Titanium replacement parts for your Hope hose / brakes!

- High quality titanium rainbow / oil slick coloured Hope hose spare fittings!
- Made from 6Al-4V titanium alloy, these are both durable and super lightweight.
- For ease of reference, we have used the same naming and numbering scheme as our Hope Hose Spares product page, making working out the parts you need much simpler.
- Fits all models of Hope brake and certain models of Magura and Echo brakes (but only when used with the correct Hope hose, standard Magura/Echo hose will not work with these fittings).
- Each item is sold and priced singly.

Weights:
Item 01: 90 Deg Bolt - 2.2g
Item 02: M6 Straight Connector - 2.6g
Item 04: 5mm Shroud - 1.4g
Item 07: 90 Deg Banjo -2.7g

We stock a range of hydraulic titanium fittings compatible with Hope brakes here.

Please note that titanium anodising is different to aluminium, in that it is a surface coating rather than a dyeing process. Due to this, it is less durable and can fade / wear off after repeated rubbing.

Always use good quality tools when fitting this item and apply copper grease to the threads before installation. Do not overtighten.

To connect Hope hose to your brake, you need the following fittings (Please note - any Item numbers that aren't available from Tartanium can be sourced from our Hope Hose Spares):

Hope Lever:
1x Item 02
1x Item 04 for Kevlar hose or 1x Item 05 for Stainless hose
1x Item 06
1x Item 08
1x Item 09
1x Item 10

Hope Caliper:
1x Item 01
1x Item 04 for Kevlar hose or 1x Item 05 for Stainless hose
1x Item 06
1x Item 07
2x Item 08
1x Item 09
1x Item 10

Magura 2005 lever:
1x Item 03
1x Item 04 for Kevlar hose or 1x Item 05 for Stainless hose
1x Item 06
1x Item 09
1x Item 10

M6 hole on brake cylinder:
1x Item 02
1x Item 04 for Kevlar hose or 1x Item 05 for Stainless hose
1x Item 06
1x Item 09
1x Item 10
Note: Double the above quantities to make up a crossover

M8 hole on brake cylinder:
1x Item 03
1x Item 04 for Kevlar hose or 1x Item 05 for Stainless hose
1x Item 06
1x Item 09
1x Item 10

Echo Lever:
1x Item 02
1x Item 04 for Kevlar hose or 1x Item 05 for Stainless hose
1x Item 06
1x Item 09
1x Item 10

If you are unsure which items you require don't hesitate to contact us.

Browse…

Recently viewed

Shopping basket

My Account