The hubs in this category are 'fixed', which means the sprocket on them is fixed to the hub (either with a spline or a thread) and you need to use a freewheel on your crank arms to make your bike function correctly.
All the hubs shown below are designed to work with both 24" and 26" wheeled bikes with 135mm axle spacing. If you purchase a hub from this category, please make sure that your frame has a 135mm gap between the inside faces of the dropouts.
Almost all 24" and 26" wheeled frames are the correct spacing to work with all hubs in this category, the only exceptions are the 116mm spaced 26" wheel frames.
There are also two main types of sprocket designed to fit on these hubs - screw on and splined. The screw on sprockets can be fitted by hand (we recommend plenty of grease so they can be removed in future if required) and they self-tight when you pedal. Splined sprockets are held in place with a lock ring. Please note that the Echo hubs have a specific spline and this is not compatible with any other brand's splined sprockets.
Technical InfoNew to trials? Then check out our product video guides for useful tips and technical advice
FacebookFollow us on Facebook for exclusive deals, promo codes and offers
Need some help?Have a question? No problem, call us on 01772 32 33 33 or get in touch via our contact page.
TartyBikes Ltd, Units 3-4, Club Street, Bamber Bridge, Preston, PR5 6FN
Web Design & Development by tame
