Back in stock for a limited time only, Jitsie are clearing out older stock at a reduced price, and we're passing the saving onto you while stock lasts!
- Super lightweight rear 116mm disc hub!
- Lightweight rear disc hub from Jitsie!
- Tapered hub shell increases in diameter towards the drive side to increase hub strength, and stiffness.
- Extra CNC machining around the rotor mount reduces weight while maintaining strength in this key area.
- Hollow aluminium axle and minimal axle bolt washers keep the weight as low as possible.
- Sealed cartridge bearings for smooth operation and long service life.
- To fit 116mm spaced drop outs when used with snail cams.
- Standard 6 bolt rotor fitting.
- Standard 1.37" x 24tpi thread to accept threaded sprockets and freewheels.
- 32 hole spoke drilling only.
- Available in black only.
- Weight: 160g
Hub Dimensions
Disc Side:
- Flange Diameter: 56mm
- Centre to Flange: 25mm
Non Disc Side:
- Flange Diameter: 42mm
- Centre to Flange: 34mm
Technical Info
Facebook
Need some help?
Good morning I wanted to know if it could fit on a monty m5 carbon rear thanks
Posted by massimiliano
Reply from TartyBikes
Hi Massimiliano
Yes, you can! The Monty M5 uses a 116mm OLD rear drop out spacing, which means any disc 116mm compatible hub will work. The Jitsie hub is supplied without snail cams, which you will need to make the spacing up to 116mm.
Ben