Now available to special order in all available Hope colours! Please make sure to select the correct axle type / colour you need from the listing! If you are unsure of what axle type you need, please get in touch before ordering.
- Available in a huge range of axle standards!
- Super reliable and easy to service.
- Made in the UK!
- The new Pro 5 rear hub from Hope has been redesigned from the ground up, offering some significant upgrades over the legendary Pro 4!
- The Hope Pro series hubs have a reputation for bulletproof reliability, a complete catalogue of spare parts and versatile, modular axle fitments. The Hope Pro 5 is one of the leading after market hubs available.
- Designed, machined and assemble right here in the UK at Hope's Barnoldswick factory, the Pro 5 is engineered to the highest standards and tested rigorously to perform in the worst of the UK weather.
- New 108 point engagement utilises a 6 pawl offset design where 3 pawls are engaged at any time on the 54 tooth ratchet ring.
- A redesigned spring and pawl greatly reduce rotational friction. Material removed from the centre of the spring reduces spring force and free hub drag.
- Wider pawls now sit inside the spring, which acts as a pawl seat inside the free hub. This helps increase load capacity and reduce wear of the free hub body pawl seats.
- New drive side labyrinth seal has zero drag and improved sealing against water and dirt ingress. It's also now much easier to remove and install the seals and free hub!
- Main axle has been machined with increased distance between the free hub bearings to improve stiffness. A taper on the drive side allows for a larger diameter drive side bearing for increased strength and durability.
- A new 2014 grade T6 alloy hub shell increases stiffness with sleek, new, laser etched Pro 5 graphics!
- Standard 6 bolt disc fitting compatible will all 6 bolt rotors on the market.
Centre lock is now also available, please get in touch!
- Available in axle standards to fit almost every frame on the market! Hubs axle end caps can be changed to a variety of fitments on most hubs, making them a long term investment that can be used on a huge variety of builds.
-
32 hole only.
- SRAM XD free hub only.
Hub Dimensions
135 / 142 (NOT Boost) OLD hubs:
- LH (non drive side) Flange Diameter: 57mm
- RH (drive side) Flange Diameter: 59mm
- Centre to LH Flange: 32mm
- Centre to RH Flange: 19.6mm
148 (Boost) OLD hubs:
- LH (non drive side) Flange Diameter: 57mm
- RH (drive side) Flange Diameter: 59mm
- Centre to LH Flange: 35mm
- Centre to RH Flange: 22.6mm
150 OLD hubs:
- LH (non drive side) Flange Diameter: 57mm
- RH (drive side) Flange Diameter: 59mm
- Centre to LH Flange: 28mm
- Centre to RH Flange: 26.8mm
157 (Super Boost) OLD hubs:
- LH (non drive side) Flange Diameter: 57mm
- RH (drive side) Flange Diameter: 59mm
- Centre to LH Flange: 39.6mm
- Centre to RH Flange: 27mm
-
Click on the variation to see a picture of that colour and axle standard. As the Pro 5 is a new product, some images may be missing but we'll update these as soon as we can!