TartyBikes Carbon 2-Bolt Booster Kit

Product code: 14129

Steel Silver Bolts	$32.94
Titanium Rainbow Bolts	$38.42

Sold out

Quality carbon booster kit from Tarty Bikes!
95-105mm spacing.

- Super lightweight and strong 2-bolt booster kit from Tarty Bikes!
- Brake mount spacing range of 95-105mm is designed for use with a rear brake. Simply measure your brake mount spacing to find out if this will fit your frame.
- 6.2mm thick Carbon booster with a 4mm thick recessed section is made of a UD Carbon layup and finished in a weather resistant lacquer. Increased width at the centre curve of the booster increases stiffness and tapers down to the boltholes to reduce weight.
- Offers 55mm vertical clearance from the top bolthole (may not fit some 19" rear tyres, please measure your setup before purchasing!).
- Two bolt options available: M5 Titanium bolts with matching titanium washers OR M5 Steel bolts with matching steel washers. With a shaft length of 46mm for the Titanium bolt and 44mm for the Steel bolt (excluding spacer) both options give ample thread insertion and 20mm shoulder for extra strength in this key high stress area.
- Trialtech SL booster spacers give 15mm of clearance from the top bolthole, leaving room for crossover routing.
- Please note: Bolts are supplied in a length to suit washerless design clamps. If you're using brake clamps that require cylinder washers, you will need either bolts that are 3mm longer, or to cut down the spacers by 3mm.
- Weight: Titanium kit 43.8g / Steel kit 52.2g (including bolts, washers, booster spacers and booster)

Browse…

Recently viewed

Shopping basket

My Account