Hope Pro 2 Evo/Pro 4 / Pro 5 Rear Hub End Cap

Product code: 12052

	Pro 2 Evo / Pro 5 Trials, Silver, 10mm Bolt Up - Drive Side - HUB452	$10.26
	Pro 2 Evo/Pro 4 Rear X12 Thro Conversion kit - HUB242	$18.80
	Pro 2 Evo/Pro 4, Black, 10mm Bolt Up - Non-Drive Side - HUB459	$10.26
	Pro 2 Evo/Pro 4, Black, QR - Non-Drive Side - HUB461	$10.26
	Pro 4 135mm x 12mm Through Axle Conversion Kit - Non-Drive & Drive Side - HUB241	$19.37
	Pro 4 Trials, Silver, 10mm Bolt Up - Drive Side - HUB472	$10.26
	Pro 5 135mm x 12mm Through Axle Conversion Kit - Non-Drive & Drive Side - HUB258	$19.37

Sold out

Replacement end cap / spacer for the Hope Pro 2, Pro 2 Evo, Pro 4 and Pro 5 rear hubs.

- Direct replacement end cap/spacer for the Hope Pro 2 Evo Trials hubs.
- Manufactured out of top quality materials here in the UK, at Hope's Barnoldswick factory.
- Complete with O-rings to ensure a great fit.
- Sold individually unless stated.
- Available as either:

Pro 2 Evo Trials, 10mm Bolt Up - Drive Side - HUB452 - Suitable only for drive side use with Hope Pro 2 Evo Trials hubs with a bolt up axle.

Pro 2 Evo Trials, QR - Drive Side - HUB453 - Suitable only for drive side use with Hope Pro 2 Evo Trials hubs used with a QR axle.

Pro 2 Evo/Pro 4, 10mm Bolt Up - Non-Drive Side - HUB459 - Suitable for non-drive side use with all Pro 2 Evo (standard or Trials) and Pro 4 (standard or Trials) hubs with a 10mm bolt up axle.

Pro 4 12mm Through Axle Conversion Kit - Non-Drive & Drive Side - HUB241 - This is a kit which includes the the non-drive side and drive-side end caps and is suitable for all Pro 4 (standard or Trials) hubs with a 12mm through axle and 135mm spacing. Please note that the standard bolt in 10mm x 135 axle does not have a 12mm hole through the middle, so you will need to change the axle too if you wish to convert the hub from 10mm bolt in x 135 to 12mm through x 135.

Pro 5 12mm Through Axle Conversion Kit - Non-Drive & Drive Side - HUB258 - This is a kit which includes the the non-drive side and drive-side end caps and is suitable for all Pro 5 (standard or Trials) hubs with a 12mm through axle and 135mm spacing. Please note that the standard bolt in 10mm x 135 axle does not have a 12mm hole through the middle, so you will need to change the axle too if you wish to convert the hub from 10mm bolt in x 135 to 12mm through x 135.

Pro 2 Evo/Pro 4, QR - Non-Drive Side - HUB461 - Suitable for non-drive side use with all Pro 2 Evo (standard or Trials) and Pro 4 (standard or Trials) hubs wtih a QR axle.

Pro 4, 10mm Bolt Up - Drive Side - HUB472 - Suitable for drive side use with all Pro 2 Evo (standard only, not Trials) and Pro 4 (standard or Trials) hubs with a 10mm bolt up axle.