IceToolz Pro Shop Chain Tool

£ $

GBP USD

Opening Hours.
Wed: 9.30am to 5.00pm (UK)
United Kingdom.
01772 32 33 33
International.
0044 1772 32 33 33

IceToolz Pro Shop Chain Tool

Product code: 11759

Overview
Questions

Stock reminder

Durable and high quality chain tool from IceToolz.

Professional chain tool!

- Designed for use in professional bicycle shops, this is one of the most durable chain tools available!
- Steel construction ensures long-lasting service.
- Rubber grip gives greater comfort when in use.
- Spare pins available separately.
- Hinged 'cap' helps keep the chain in place while it's in the tool - a nifty solution to a frustrating problem!
- Huge 15cm long knurled T-handle gives great leverage to make sure it can tackle even the sturdiest of chains.
- Suitable for use with both 1/8" and 3/32" chains.

Questions

Ask a question

There are currently no questions relating to this product.

Reviews

Write a review

80%

Based on 1 customer rating

Solid parts!

Posted by Jonny

Ok so this chaintool was recommended to me by Tarty to be used with the Gusset BMX tank chain. It worked flawlessly eventually. I had to modify the tool a fair bit for it to work flawlessly but now i have it'll be good for life! So yeah the actual tool is tough and solid, a nice long t handle to make pushing the pins out much easier than a conventional tool. But the part where the chain sits was slightly too narrow for the Gusset Tank chain so i had to angle grind down the backplate to allow the chain to fit in to the 3 link holder. After pushing the pin out i then realised that the pin was stuck in the recess behind the backplate as the pin was too large for to slide out so after prying out the pin i ran the angle grinder down the recess to open it up slightly and the pin slides in and out perfectly now. The final modification came from when your pushing the pin back in there is a little slot for the pin to sit on so the tool lines up to the pin perfectly and again the pin was too thick for this slot, a quick file to the sides was enough to make it just perfect. Now this could be a one off and i got a dodgy tool but i don't believe so. Anyway i still rate the chaintool as high because these modifications were very easy for me being a mechanic to quickly do. The chaintool is sturdy and easy to use and im sure it's down to the chain being a very thick chain. Normal chains for this tool wouldn't and shouldn't be an issue. If you require me to set in some detailed pictures of the slight modifications i made to the tool then just let me know! I didn't want to make the product sound bad due to my having to modify it because i truly believe it's down to the chain being too thick for the actual tool so yeah solid product and i would recommend to anyone.

Reply from TartyBikes

Hi John - thanks for the detailed review! Sorry to hear you had those issues but we're glad you were able to overcome them with relative ease. We will look in to chain tools that can accommodate this chain without modification so that others don't have the same issue. Thanks, Flipp.

People who bought this also bought…

TartyBikes V4 Chainstay Protector

Product code: 12485

£4.50

100%

Chainstay Protectors

4 colours available

£4.50

4 colours available

New sizing, available in 4 colours!
Wide range of compatibility, from the steel Inspired Arcade up to the widest alloy trials frames!
Double stitched velcro ensures maximum life!

£4.50

In stock